-
Radar
Detectors Beltronics Radar Detectors Cobra Radar Detectors Escort Radar Detectors Whistler Radar Detectors ALL Radar Detectors -
Laser
Jammers Laser Accessories Laser Jammers ALL Laser Jammers -
Photo
Radar GPS Speed Camera Detectors License Plate Shields Photo Radar Accessories ALL Photo Radar -
Motorcycle
Radar Detectors Motorcycle Accessories Motorcycle Mounts Motorcycle Radar Detectors ALL Motorcycle Radar Detectors -
Radar Detector
Accessories Accessories Cords Kits Laser Veil Motorcycle Mounts Other Accessories Visor Holders ALL Radar Detector Accessories -
GPS Navigation
Systems Garmin NavGear TeleType ALL GPS Navigation Systems -
Radar
Detector Info
Blinder Install
Blinder Install
|
Blinder Laser Jammer InstallRadar Roy and his staff began the project by first installing the Blinder M-20 laser jammer. The Blinder M-20 comes with two laser jammer heads. As a laser beam is 18" wide at 500 feet, one jammer to the front, near the R1's headlamp, and one laser jammer head in the rear, near the license plate, would be adequate to jam all police laser guns. The rear head was installed first using a mount fabricated by "Spider Mounts" who are Radar Roy's fabricators and who manufacture many of the specialized motorcycle radar detector mounts sold on RadarBusters. This mount connected the rear jammer to the license plate of the R1.
The front Blinder jammer head was installed under the front faring using double sided tape.
The controller for the Blinder must be installed in a water proof area. The Blinder jammer heads, the power cable, the alert LED and Speaker all plug into the controller using standard RJ-11 jacks. (telephone jack). It was determined that the best location for the controller would be under the seat.
The Blinder has an LED and small speaker to alert when the laser jammer is activated. The LED was mounted using nylon "Zip Ties" to the ignition switch. The speaker (app 3") was taped to the faring using double sided tape.
The power switch was mounted to the side of the seat, allowing the rider to power on or off the Blinder M-20 while riding.
The install of the Blinder M-20 on the R1 motorcycle took approximately two hours. |
From: $55.99
Toll Free Protector Licence Plate Shield for Cars and Trucks
Our Price: $34.98
1 1/4-inch Handlebar Motorcycle Mount
Our Price: $36.00
5" WorldNav Portable Truck GPS Unit
Our Price: $428.98
Beltronics BEL RX65 Radar Detector
From: $299.99
Our Price: $79.99
Our Price: $29.98
Whistler XTR-695 Radar / Laser Detector
Our Price: $219.99
Cobra XRS 9440 Radar/Laser Detector
Our Price: $79.98
Beltronics STi Driver Radar Detector
Our Price: $469.99
Customer Service:
7AM-9PM CT, Mon - Fri
8AM-9PM CT, Sat - Sun
Sales Assistance:
7AM-9PM CT, Mon - Fri
8AM-9PM CT, Sat - Sun
Call: 1-888-227-8927 or
email us
