Detector Install

	Pages
1	Introduction
2	Equipment
3	Blinder Install
4	Detector Install
5	H.A.R.D. Install
6	The Test!

Escort 8500 X-50 Install

The Escort 8500- X50 radar detector was then installed.

A Stemstand mount was used to mount the Escort 8500 X50. This mount slides into the steamhole found on many sport bikes. The radar detector is held in place by placing industrial Velcro (supplied) on the mount and detector.

"Spider" Steam Mount for R1

A direct wire cord was then tapped into the accessory power cable on the R1. This allows power to the detector while the motorcycle is operating, and turns off power when the motorcycle is turned off.

Installing the direct wire power cord

The Escort 8500 X-50 was then placed onto the mount, plugged in and powered up. Total install time, 15 minutes.

Escort 8500 X-50 with blue display

More Ways To Shop

Helpful Information

Buyer's Guide Introduction

Introduction: Choosing Your Detector

Site Map