Call us at - 1-888-227-8927

You are here:  Home  >  Helpful Information  >  H.A.R.D. Install 

H.A.R.D. Install


Pages
1 Introduction
2 Equipment
3 Blinder Install
4 Detector Install
5 H.A.R.D. Install
6 The Test!


H.A.R.D. System Install

As it is often difficult to hear and/or see you radar detector when it is activated on a motorcycle, Radar Roy choose to provide the rider with the Legal Speeding H.A.R.D. system. The H.A.R.D. is a two part wireless system. The transmitter connects directly to the radar detectors power port, and the power cable then plugs into the H.A.R.D. transmitter. The receiver then mounts inside the helmet. This heads up display the alerts the rider with a bright LED light, that the radar detector is activated.

The transmitter was Velcroed to the side of the Escort 8500 X50.

HARD Transmitter
H.A.R.D. Transmitter

The receiver was mounted to the outside of the helmet using Velcro and the LED cable was placed inside of the helmet behind the visor.

H.A.R.D. Receiver

HARD LED
H.A.R.D. LED

Total install time three minutes

The Test >>