Blinder M20 X-Treme

Includes 2 (plug in) laser jammer modules (plug in), interface module, Audio and LED (plug in) alerts, Power on/off switch, leveling device (plug in). M20 X-Treme is ideally suited for front laser jamming on cars and pick up trucks.

• 2 Transceivers with integrated laser detector/jamming
• All electronics concealed by epoxy
• Smart new snap-lock for easy replacement of lenses
• Single cable connector for easy plug-in to cabin interface
• Transmitter type:  2 X 8 infra red special manufactured jamming diodes
• Detector type:  2 X 3 IR special manufactured photo diode with amplifier
• Microprocessor with stealth jamming technology
• Operating Wavelength:  904 nanometers
• Physical dimensions:  4" X 2" X .70"
• Power requirements: 12.2 volts 

How Blinder X-Treme Technology Works

• When the ignition is turned on, the upstart self-test function (STF) will tell you that the BLINDER is ready.
• BLINDER is on stand-by until a police laser gun or one of the automatic photo laser speed traps hits the car. Now the X-TREME starts to do its job.
• The Laser Warning System (LWS) tells the driver, that a laser gun is operating near him. He may want to slow down.
• The Infra Red Detectors transmit the incoming laser pulse frequency to the built-in computer. The optimal jamming pulse (APS) is now selected.
• Because the jamming pulse is transmitted only when the laser gun is active, it has become possible to apply an extremely powerful return-jamming pulse signal.
• The police laser gun or photo trap cannot measure the speed, and the driver can continue without a speeding ticket.

Legal

There are no federal laws in the U.S.A. that prohibit the ownership and/or operation of laser jammers.

However, some states have enacted their own laws that do prohibit the ownership and/or use of these devices. These states include: Nebraska, Minnesota, Utah, California, Oklahoma, Virginia, Colorado, Illinois and Washington DC.