Whistler Cruisader motorcycle radar/laser detector is designed specifically for 2 wheelers.
Optional helmet display is designed to mount inside your helmet and provides LED alert that your detector is activated!
- Designed Specifically for Motorcycles and Snowmobiles
- Total Band™ Protection
- POP™ Mode Detection
- LCD Text with Blue Backlit Display
- Flexible Installation Options
- Display Unit is Standard 2 1/16 Diameter Allowing for Customization
- Additional Intense Blue Alert LED
- Ambient Temperature/Battery Voltage Displays
- Stay Alert™
- 360° Total Perimeter Protection™
- Patented VG-2 Cloaking™ Technology
- Laser-Radar Receiver Designed to Look Like Part of the Vehicle.
- Optional Wireless In-Helmet LED Alert
- Three (3) City Modes
- Tutorial Mode
- Three Year Manufacturer's Warranty for Detector / One Year Manufacturer's Warranty for In-Helmet Display
- Includes 1 Control Panel Display Unit, 1 Laser Radar Receiver, 1 Laser Receiver, and Mounting Hardware
Operating Band
- X-band 10.525 GHz ± 25 MHz
- K-band 24.150 GHz ± 100 MHz
- Ka-band 34.700 GHz ± 1300 MHz
- Laser 904nm, 33MHz bandwidth
Cruisader Radar Detector Specifications
Power - 12 Volts
Wireless (WiHD) Frequency = 433.92 MHz
Control Panel Display Unit - 3"L x 2.062"D, Wt. = 5.0 oz.
Laser Radar Receiver - 3.16"L x 2.82"W x 1.23"H, Wt. = 8.1 oz.
Laser Receiver - 2.5"L x 1.45"W x 0.8"H, Wt. = 1.4 oz.
Cruisader In-Helmet Display Specifications
Power - 6 Volts - Two (2) CR2450 Lithium Coin Cells
Display Unit - 2.06"L x 1.25"Wx 0.53"H, Wt. = 1.5 oz.
Boom - 5.5" Long
Tests
Radar Roy's Tests
Radar Roy tested the Cruisader at the 2005 SML Radar Detector Shootout and at his test location in Arizona.
The install on an R1 took approximately 90 minutes and was a clean, good looking unit.
The Cruisader had good range on all radar detector bands.
The heads up display receiver is designed to mount inside the helmet, under the padding. Some riders may find this location uncomfortable or awkward.