Photo Radar License Plate Cover - IR Invisi-Plate
OnTrack, the manufacturer of the IR Invisi-Plate has ceased operations and the IR Invisi-Plate is no longer available.
The Stealth Veil G6 infrared absorbing coating, is the material we use to block IR cameras, which include the ubiquitous Flock cameras.
The Ultimate Photo Radar License Plate Cover - IR Invisi-Plate
Are you looking for a solution to beat those photo enforcement cameras without the risk of completely blocking your plate to the naked eye?
Automated photo radar and red light cameras are HUGE cash cows for law enforcement around the world.
To fight back, a number of companies have developed license plate covers with embedded prisms that block the camera's ability to see your license plate at certain angles.
The higher end products like the Super Protector and the Toll Free Protector are very effective in combating these cameras.
However, because these covers are so effective, many states and municipalities have passed laws prohibiting their use.
Also, these types of covers can be spotted by the naked eye. Officers can easily catch violators and are issuing citations in the neighborhood of $400 each.
Agencies Updating Photo Enforcement to IR Technology
The older photo enforcement cameras that have been used by police agencies for years had one major problem.
To get a clear and crisp photograph they used a white light strobe similar to the flash on your camera, known to cause temporary blindness to motorists.
As a result of this, agencies worldwide have been in the process of updating these older cameras with cameras using infrared technology.
The IR Invisi Plate – Invisible to the Eye and Stealth for iR Photo Enforcement Cameras!
OnTrack, the world leader in photo radar protection has developed a unique cover called the IR Invisi-Plate that is able to ONLY block the infrared light spectrum above 720 nm, thus keeping your plate visible to the naked eye while masking it from the iR photo radar and red light cameras.
The result is a cover that will not draw the attention of law enforcement, but will make your vehicle stealth to all the new iR cameras.
Benefits of the IR Invsi Plate
• 100% clear – Will not draw the attention of law enforcement
• Works day or night
• Ultra thin, installs in seconds, and fits all North American license plate frames
• 1 year warranty
• Puts an end to those photo enforcement citations
Frequently Asked Questions About the IR Invsi Plate
How do I know if they are using iR cameras or the older cameras in my area?
The older camera has a clear lens and it flashes a bright white light. The newer iR flash units may have a redish lens cover and when it does flash you may see a dim red flash.
Will this cover work against the older photo enforcement cameras?
This cover is not designed to defeat the older, visible light cameras.
What brand photo enforcement cameras are these effective against?
Some of the most common iR camera manufacturers are: Truvelo Specs, LaserCraft, Multanova, Vitronic and Nestor Traffic Systems
Where are these iR Cameras used?
iR photo enforcement cameras are used in photo radar enforcement, red light camera enforcement and toll enforcement.
Are these covers legal to use?
A number of states, including Colorado and Washington D.C., have laws prohibiting the use of any device that can defeat photo camera enforcement.
Because this cover is clear to the naked eye, you wouldn’t raise the suspicions of law enforcement.
Therefore we recommend that you check your state and municipal laws and comply with them accordingly.
Use of this product by the buyer constitutes an agreement for the following. Buyer is responsible for checking local codes before installing this product on a vehicle. Buyer assumes all responsibility for using this product in compliance with local motor vehicle codes in the area of vehicle use. ON TRACK Manufacturing Corp., its distributors, dealers, and affiliates will not be held liable for use of the product, and do not guarantee effectiveness of the product. Drive defensively. ON TRACK does not endorse speeding.
IR Invisi-Plate – Passes The Test!
One of the most frequently asked questions we receive from customers about our IR Invisi Plate is how well does it work.
Yes, it does work, and there is a simple way that you can test it yourself if you have a proper IR camera.
Testing the IR Invisi-Plate – What You Need to Conduct the Test:
1: A consumer-level still camera or video camera that has “night-shot” or “infrared mode”, or USB computer CCTV camera with infrared (low cost ones are available on eBay or from other online sellers). If it has a setting for “night shot,” the image will appear green (just like the photo on the right). A Sony Handycam in night shot mode works well and allows HD image capture. Note: some cameras have “night” mode, but still only shoot in the visible light spectrum by doing a long shutter to get the proper exposure and normal colored photographs or video. These types of recording devices will not work for this test.
2: An IR-Pass filter (aka IR filter), large enough to cover the entire lens of the camera. We use 840 nm to 930 nm filters for testing because they work best.
a) Place the IR Invisi-Plate over your car’s number plate.
b) Place your camera in IR Mode. Almost all consumer-level still photo and video cameras shoot in a combination of visible and IR light. Therefore, just testing the cover with the camera in IR mode will not likely work.
c) This is where the IR filter comes in. It blocks out all light except for the IR wavelength it is designed to pass. Place the IR filter over the camera lens.
d) View the IR Invisi-Plate from slight angles (side and overhead) and watch how the plate numbers disappear!